Getting Started

A step-by-step walkthrough from creating your Workgroup Pyeongmok account to designing your first drawing.

Step 1 — Sign up & log in

  1. Click the Log in button in the top navigation.
  2. In the login dialog, enter your email and password, or choose social login (Google / Kakao).
  3. If this is your first visit, switch to the Sign up tab and register with your email and password.
  4. Once the account icon appears at the top, you're ready to go.
Social login lets you start right away without setting a password.

Step 2 — Choose a studio

  1. Click Studio in the top navigation.
  2. Pick a lattice pattern engine from the dropdown.
    If this is your first time, we recommend Se-sal.
  3. When the studio opens, click the Door tab in the menu on the left to open its panel, and adjust the parameters there.
  4. The drawing is rendered on the canvas in the center as you go.
Type the specs you want as a sentence into the prompt box in the studio's top navigation — something like "change it to a Wanja-sal sliding door, 3 panels, 1800 wide by 1200 high" — and the AI applies those parameters for you. If another engine suits the request better, it switches you to that studio automatically. Prompts are currently interpreted in Korean.

Step 3 — Save your first drawing

  1. Open the Drawing tab in the menu on the left.
  2. Enter a name in the Drawing name field and click Save.
  3. Saved drawings can be reopened anytime from the My drawings list at the bottom of the Drawing tab, or from the My Drawings page.
Drawings are stored in the cloud, so you can reach the same drawing by logging in from any device.

How the Interface Is Laid Out

The studio screen has four main areas.

AreaLocationRole
Menu tabsNarrow column on the far leftCollection · Drawing · Door · Motifs · Finish · Rendering · Estimate · Specs · Export. Click one to open its panel beside it.
Tab panelNext to the menu tabsSettings for the selected tab. Click the same tab again, or the button on the panel's edge, to collapse or expand it.
CanvasCenterLive preview of the drawing; zoom and pan with the wheel or by dragging
Canvas toolbarAbove the canvasLeft: Select, Pan, Edit lines, Shapes, Place, plus the door and frame sizes / Right: zoom out, zoom in, Fit (details)